Digital Camera Mounts:
Homemade out of Alu-Profile
Camera Mount Alu-Profile
Pic a (Plus Photo Screw) |
 |
Camera Mount Alu-Profile
Pic b (Screwed together) |
|
Camera Mount Alu-Profile
Pic c (Mounted on Scope) |
Material needed:
One 4 -5 inch long and 3/4 inch wide Aluprofile, one "tube wall mount", one Tripod-Photo- Screw. Total cost less than 10 US$.
The aluprofile and the "tube wall mount" you get from the market for building goods. The photoscrew you get either from an old
unsuable tripod or buy a new one in the photoshop.
When you buy the "tube wall mount" take your eyepiece with you to select the right diameter size. Into the aluprofile you have
to drill a little slot to give the camera space to sclide to the eyepiece. On the front side of the aluprofile you have to drill
a hole to screw the "tube wall mount" to the profile.
How to connect:
First screw the the "tube wall mount" to the aluprofile (very tight) (picture a), mount the eypiece into the tube mount, screw
the camera to the profile (picture b), slide the eyepiece in the telescope and fix the eyepiece (picture c).
Homemade out of Plastic-Tube:
Mount out of Plastictube
Digital Camera commmercial mount:
Commercial made Mounts made by (Scopetronix)
|
